Model No.: PCV08
1. The mechanical valve overflow alarm valve adopts exclusive design and manufacture, and its maximum finish has passed strict quality control inspection to meet the sanitary ware quality standards.
2. Pump Control Valve is hypoallergenic. In the production process, all allergens caused by dyes, chemical reagents or Other additives are eliminated.
3. Pump Control Valve can be used for a long time, because it can withstand certain extreme industrial conditions.
4. Using advanced solid-state technology, it does not contain any glass inside, so if the bulb breaks, it will not cause serious injury.
A1BEST pressure reducing valve is a diaphragm type Hydraulic Control Valve, driven by hydraulic pressure in the piping system. The function of the valve is to reduce the high pressure to the preset low pressure, and although the medium flow or the pressure in front of the valve fluctuates, the pressure behind the valve will always remain stable and maintain the set pressure range.
A1BEST pressure reducing valve is controlled by pressure reducing pilot valve, and is equipped with pressure reducing pilot valve, needle valve, micro filter and Ball Valve.
Under normal circumstances, water flows from the water inlet to the upper chamber.
◔Attributes and advantages
• Driven by the pressure of the pipeline system, it uses the energy of the pipeline system to work automatically to achieve energy conservation and environmental protection.
• Controlled by a pilot valve to reduce energy consumption, achieve accurate decompression effect, and stabilize the pressure behind the valve.
• Double chamber design, with the functions of fully open and fully closed. Slow closing does not cause pressure fluctuations, and the diaphragm with support is well protected.
• There are internal holes that connect the bottom chamber and outlet of the basic valve to ensure the stability of the reaction to keep the pressure behind the valve stable and avoid any vibration and noise.
• With a direct current channel, the friction loss is very small, there is no vortex and turbulence, and the damage of cavitation is reduced.
• Long-pitch directional design, stable movement of valve stem, no gap.
• Automatic balancing, the connection between the valve disc and the valve stem is designed with a large gap, and the valve flap is free relative to the valve stem in the vertical plane, which can balance the tolerances of the processing and sealing surfaces. Good connection and no leakage. Realize the function of reducing dynamic pressure and static pressure.
• Ductile iron with a sphericity higher than 90%, an internal foundry with advanced smelting technology and strict quality control system, can provide test reports and test rods according to orders. Records and test strips are kept in the factory for one year.
• Has good corrosion resistance, using stainless steel, copper alloy, rubber and other anti-rust materials made by DuPont, as well as molten epoxy coating for the inner and outer surfaces of the basic valve. All features comply with ANSI/AWWA C550 and other international specifications, such as WRAS, NSF61.
A1BEST International Corporation
A1-BEST has been struggling for carry out most cost-efficient, easy performance and long last life products for global market.
At present, A1-BEST occupies 100,000 m2 with 15 workshops cover 3000~4000m2 of each. It locates in High-Tech Industrial zone of Kunshan Jiangsu Province. Products meets industry standards as per ANSI 16.10 / ANSI 16.11/IS/BS/DIN/JIS.Material of construction is selected based on Pressure / Temperature limits and corrosion resistance or customers` requirements. This will be as ASME/ANSI 16.34 standard .testing is carried out as per API/BS/DIN standard.
- Company Name: A1BEST International Corporation
- Representative: CHANG YUAN CHIEH
- Product/Service: VALVES , BUTTERFLY VALVE , GLOBE VALVE , FLAT VALVE , STATION VALVE , HYDRAULIC CONTROL VALVE
- Capital (Million US $): US $ 25,000,000
- Year Established: 2017
- Total Annual Sales Volume (Million US $): US$50 Million - US$100 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): US$50 Million - US$100 Million
- No. of Production Lines: Above 20
- No. of R&D Staff: 21 -30 People
- No. of QC Staff: 31 -40 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: Suzhou, Jiangsu Province, China
- Contact Person: Mr. Jason Chang
- Tel: +886-912-195558
Premium Related Products